Single-Phase 230 V Plasma Cutter | Manual and Professional Plasma Cutting

Active filters

Filter by

Brand

Brand

Usage

Usage

By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.

Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.

Active filters

favorite_border favorite
EASYCUT 25
Save 10%

In stock

Gys

Reference: 065543

EASYCUT 25
(2 reviews)

€635.51

€706.12

516,67 € tax excl.

or 4 x 158,88 €

Free delivery

2-year warranty

The EASYCUT 25 plasma cutter is an ideal solution for precise cutting of all types of metals up to 8 mm thick. Ultra-lightweight (7.8 kg) and easy to transport, it delivers excellent performance without compromising on quality.

Equipped with inverter technology, it ensures clean cutting on steel (mild, stainless, hardened, HSLA), aluminum, copper, and more. Its HF-free ignition protects nearby electronic equipment, while its ergonomic torch, resistant to shocks and heat, ensures comfort and stability.

Easy to use, the EASYCUT 25 features an intuitive control ring, manual air pressure adjustment (2.5 to 6.5 bar) with a bargraph, as well as automatic torch detection. Its robust design with reinforced body and disconnectable components makes it a reliable and durable tool, ideal for workshops and bodywork applications.

favorite_border favorite
GYS EASYCUT 40 Plasma Cutter

In stock

Gys

Reference: 029743

GYS EASYCUT 40 Plasma Cutter
(15 reviews)

€815.05

662,67 € tax excl.

or 4 x 203,76 €

Free delivery

2-year warranty

Suitable for maintenance and bodywork, the EASYCUT 40 plasma cutter easily cuts all types of metal up to 15 mm thick. With a power output of 40 A, it excels at precision cutting at low amperage.

Inverter technology ensuring quality cutting on all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Easy and quick consumable installation (Trafimet® standard).

Efficient cutting: air-cooled torch body providing high arc stability at various operating levels.
Easy-to-use trigger mechanism for greater comfort. Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required.

Manual air pressure adjustment (2.5 < 6.5 bar) with front panel bargraph.
Automatic torch detection.
HF-free ignition to avoid interference that could damage nearby electronic equipment.

Protected against overvoltage and overcurrent
Torch presence or insufficient air pressure indicator.


→ Requires connection to a compressed air supply delivering 100 l/minute at a variable pressure between 2.5 and 6.5 bar depending on the machine setting.

Supplied with a TPT 40 torch 4 m long and a 10 mm² section earth clamp cable 2 m long.

favorite_border favorite
TELWIN - TECHNOLOGY 41XT - Plasma Cutter

In stock

Telwin

Reference: 816146

TELWIN - TECHNOLOGY 41XT - Plasma Cutter
(2 reviews)

€886.62

720,83 € tax excl.

or 4 x 221,66 €

Free delivery

2-year warranty

This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass....
It is compact and has a small footprint (420 x 182 x H 292 mm) and weight (7 kg)
This cutter allows a clean cut on materials up to 15 mm thick or 18 mm in separation.
It allows piercing of sheet metal (refer to the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable replacement indicator device c

The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.

This cutter is equipped with an indicator light signalling the need to replace consumables. 

Delivered with a 4 m torch + earth clamp and cable 3 m long

favorite_border favorite
TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
Save €89.00

Supplier stock

Telwin

Reference: 816147 + 804416

TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
(1 review)

€1,227.10

€1,316.10

997,64 € tax excl.

or 4 x 306,78 €

Free delivery

2-year warranty

favorite_border favorite
EASYCUT 30 FV

In stock

Gys

Reference: 013858

EASYCUT 30 FV

€970.73

789,21 € tax excl.

or 4 x 242,68 €

Free delivery

2-year warranty

The EASYCUT 30 FV is a 30 A plasma cutter capable of cutting steel up to 10 mm (15 mm separation cut). Its HF-free ignition extends consumable life and protects surrounding electronic equipment. Ideal for maintenance and bodywork, it combines robustness with ease of use.

Thanks to inverter technology, it delivers quality cutting on mild steel, stainless steel, hardened steel, HSLA, aluminium and copper. The interface is clear with manual adjustment of current and air pressure via a front-panel flow meter.

The ergonomic 4 m air-cooled torch is designed for safe, stable and shock-resistant use. It is easily disconnectable for easy transport.

Equipped with Flexible Voltage technology (85–265V) and PFC, it adapts to all single-phase voltages and optimises power consumption with up to 30% energy savings. Its reinforced casing, anti-slip feet and compact format make it a reliable and portable tool for all environments.

favorite_border favorite
EASYCUT K25
Save 10%

In stock

Gys

Reference: 068063

EASYCUT K25

€917.37

€1,019.30

745,83 € tax excl.

or 4 x 229,34 €

Free delivery

2-year warranty

The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).

Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).

favorite_border favorite
Telwin Technology 60 XT plasma cutter
Save 10%

In stock

Telwin

Reference: 816148

Telwin Technology 60 XT plasma cutter
(2 reviews)

€1,224.87

€1,360.97

995,83 € tax excl.

or 4 x 306,22 €

Free delivery

2-year warranty

This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device

The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.

This cutter is equipped with a warning indicator light for consumable replacement 

Supplied with a 4 m torch + ground clamp and 3 m cable

favorite_border favorite
TELWIN Technology 54 XT | Plasma cutter with integrated compressor

In stock

Telwin

Reference: 816147

TELWIN Technology 54 XT | Plasma cutter with integrated compressor
(3 reviews)

€1,224.87

995,83 € tax excl.

or 4 x 306,22 €

Free delivery

2-year warranty

This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables clean cutting of materials up to 12 mm thick or 15 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable change indicator device

This cutter is fitted with a warning indicator light for consumable replacement 

Delivered with a 4 m torch + ground clamp and cable 3 m long

favorite_border favorite
GYS Cutter 45 CT Plasma Cutter without torch

Supplier stock

Gys

Reference: 014787

GYS Cutter 45 CT Plasma Cutter without torch
(3 reviews)

€1,409.54

1 146,00 € tax excl.

or 4 x 352,39 €

Free delivery

2-year warranty

The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 25 mm* thickness on a wide range of materials. Designed for use in demanding environments, it features a very robust mechanism and an intuitive control panel.

• Cuts mild steel, stainless steel, hardened steel, HLE steel, aluminium, copper…
• 3 working modes:
- Cutting on solid sheet metal
- Cutting on grid/mesh supports
- Trigger lock
• HF-free ignition, avoiding interference that could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.

Delivered without torch.
MT-70 torches for professional use of your cutter, 6 or 12 m long, available as an option on the site.

* Clean cut is 25 mm, separation cut 30 mm and piercing 12 mm when this cutter is fitted with an MT-70 torch

Ground clamp + cable 2 m long, 10 mm² cross-section, supplied with the unit

favorite_border favorite
GYS Cutter 45 CT Plasma Cutter + TPT40 torch
Save 10%

In stock

Gys

Reference: 013629

GYS Cutter 45 CT Plasma Cutter + TPT40 torch
(5 reviews)

€1,430.03

€1,588.92

1 162,66 € tax excl.

or 4 x 357,51 €

Free delivery

2-year warranty

The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 20* mm thickness on a wide range of materials. Designed to operate in harsh environments, it features a very robust mechanism and an intuitive control panel.

• Cuts steels (mild, stainless, hardened, HSLA), aluminum, copper…
• 3 working modes:
- Cutting on solid sheets
- Cutting on grid supports
- Trigger lock
• HF-free ignition that avoids interference which could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.

Supplied with a TPT 40 torch for cutting only, with a length of 4 m.
* Clean cut is 15 mm, separation cut 20 mm and piercing 8 mm when this cutter is equipped with a TPT 40 torch

favorite_border favorite
GYS Cutter 35 KF PFC |GYS Plasma Cutter with integrated compressor
Save 20%

In stock

Gys

Reference: 080768

GYS Cutter 35 KF PFC |GYS Plasma Cutter with integrated compressor
(2 reviews)

€1,430.02

€1,787.52

1 162,64 € tax excl.

or 4 x 357,51 €

Free delivery

2-year warranty

Thanks to its integrated compressor, the EASYCUT K35 PFC plasma cutter allows you to cut metal on any construction site where a single-phase power supply is available.
Its PFC technology allows it to operate from 195 V to 265 V and achieve quality cuts even on 100 m construction site extension cords.
Small, lightweight and easy to transport, it is capable of delivering 35 A of power to cut different types of metals up to 15 mm thick in separation cut.

Automatic air regulation adapted to the TPT 35 torch.
Cuts all steels (mild, stainless, hardened, HSLA), aluminum, copper, etc. and cutting speed higher than Oxy-fuel thermal cutting

Very practical on construction sites thanks to its integrated compressor.
Internal air filter with automatic purge to prevent condensation in the torch.
HF-free ignition that avoids interference that could damage nearby electronic equipment.
Storage compartment for consumables.

Ideal for travel and construction sites

Accepts extension cords up to 100 m.
Reinforced body and anti-shock skids.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Rated IP23S to withstand harsh environments.
Optimized cooling with a ventilation channel that isolates the electronic components from dust.

Delivered with:
a TPT 35 torch with a length of 4 m
a ground clamp with a 10 mm² cross-section cable, length 2 m
Two nozzles and two electrodes 

favorite_border favorite
LINCOLN TOMAHAWK 30K | - Plasma Cutter with integrated compressor
Save 20%

In stock

Lincoln Electric

Reference: K12038-3

LINCOLN TOMAHAWK 30K | - Plasma Cutter with integrated compressor
(2 reviews)

€1,840.01

€2,300.01

1 495,97 € tax excl.

or 4 x 460,00 €

Free delivery

2-year warranty

The Tomahawk 30 K plasma cutter is the most flexible plasma cutting machine on the market. The machines are delivered ready to use, capable of cutting quickly and precisely.
Powered by single-phase 230V, ideal for on-site work. With this cutter, plasma cutting will no longer be a problem — forget grinding, simply take the torch and cut in just a few seconds.

  • High performance - Innovative electrode and cutting nozzle design.
  • Flexible - a single-phase 230V power supply is sufficient.
  • Robust - long-life integrated compressor or external compressed air supply.
  • Portable 18.5 kg only, small and compact.
  • Cutting of various metals – Unalloyed steel, stainless steel, aluminum and others.

Output current range 15 - 30 A
Duty cycle 30A@60% - 25A@100%

Example of possible cutting thickness for steel:
Recommended cutting thickness: 12 mm
Clean cutting thickness: 16 mm maximum
Separation cutting thickness: 20 mm maximum

thanks to a button on the front of the unit, it can be connected to a compressor.

Delivered with
One LC 30 manual torch, length 4 m - EURO connector
Cable and ground clamp


favorite_border favorite
Lincoln - Plasma Cutter TOMAHAWK 45
Save 5%

Supplier stock

Lincoln Electric

Reference: K14391-1

Lincoln - Plasma Cutter TOMAHAWK 45

€1,835.68

€1,932.29

1 492,45 € tax excl.

or 4 x 458,92 €

Free delivery

2-year warranty

The Tomahawk 45 plasma cutter is light enough to be transported to any job site — simply connect the compressed air and start cutting immediately.
Ideal for maintenance work, small-scale fabrication (e.g. ventilation duct installation), demolition work..

  • High performance - Innovative electrode and cutting nozzle design.
  • Flexible - a single-phase 230V power supply is sufficient.
  • Contact cutting device Reliable plasma arc ignition without high frequency.
  • Enhanced safety: The parts-in-place system detects correct installation of torch consumables
  • Cutting of various metals – Unalloyed steel, stainless steel, aluminium and others.
    Power supply from a generator is possible 

Output current range 15 - 45 A
Duty cycle 40A@60% - 45A@145% - 30A@100%

Example of possible cutting thickness for steel:
Recommended cutting thickness: 16 mm
Clean cutting thickness: 20 mm maximum
Severance cutting thickness: 25 mm maximum

Supplied with

One manual torch length 6 m - EURO connector
Cable and ground clamp


favorite_border favorite
TELWIN | Plasma cutter pack Technology 41XT + consumables box

Supplier stock

Telwin

Reference: 816146+804415

TELWIN | Plasma cutter pack Technology 41XT + consumables box
(2 reviews)

€968.63

787,50 € tax excl.

or 4 x 242,16 €

Free delivery

2-year warranty

favorite_border favorite
ESAB Cutmaster 30+

Supplier stock

ESAB

Reference: 0559130004

ESAB Cutmaster 30+

€1,677.60

1 363,90 € tax excl.

or 4 x 419,40 €

Free delivery

2-year warranty

The Cutmaster 30+ combines power and portability, offering a high-performance solution for plasma cutting. Its 4.3" TFT LCD screen and enhanced features ensure precise control and increased flexibility for clean cuts up to 10 mm. Equipped with the SL60 1Torch, you get the complete plasma cutting package.

Recommended piercing and cutting capacity: 10 mm

Maximum edge cutting capacity: 16 mm

Key features:

  • Portable and durable with three handles and an industrial, lightweight, weather-resistant enclosure
  • Bright 4.3" TFT LCD screen with glove-friendly adjustment knob to simplify use and provide increased control and flexibility
  • Dual input 120-240 V, single-phase power supply with automatic voltage detection that defines the maximum output amperage
  • Equipped with an SL60 1Torch industrial torch with 2T/4T function, safety trigger lock and dual-pressure trigger to preserve bottled air
  • Switching between normal cutting and grid cutting modes
  • Automatic air pressure detection and post-cut air purge to extend consumable life
  • Duty cycle of 40% at 30 A (120V) 100% at 20 A (120V)
  • Cutmaster Black Series consumables included for up to 60% longer service life
  • 3-year warranty on the power supply and 1-year warranty on the torch and cables
favorite_border favorite
CUTTER 105 CT with accessories

Supplier stock

Gys

Reference: 081109

CUTTER 105 CT with accessories

€3,204.29

2 605,11 € tax excl.

or 4 x 801,07 €

Free delivery

2-year warranty

The CUTTER 105 CT is a high-performance plasma cutter, lightweight (29 kg) and powerful (105 A), designed for intensive use in the workshop and on site. It offers a cutting capacity of up to 50 mm thickness on steel and features 5 operating modes: cutting solid sheets, perforated sheets, and gouging.

Key performance

  • High duty cycle: 105 A at 60%, for maximum productivity.

  • Cuts all types of metals (mild steel, stainless steel, hardened steel, HLE, aluminum, copper).

  • Concentrated arc for a clean cut with minimal slag.

Suitable for harsh environments

  • Optimized cooling with electronic dust protection.

  • Reinforced housing, anti-shock pads, IP23 protection for outdoor use.

  • Compatible with generator (30 kW recommended).

  • Transportable by a single person.

Ease of use

  • 5 cutting modes with locked trigger options.

  • Manual air pressure adjustment with front panel indicator.

  • Air filter with automatic purge to protect the torch.

  • HF-free ignition, avoiding electronic interference.

  • Integrated compartment for consumables.

  • Optional analog CNC kit for cutting tables.

  • Simple software update via USB-B port.

Premium torch

  • Compatible with many torch models (different lengths, angles, etc.).

  • Wide range of consumables suitable for all thicknesses.

  • Designed to withstand shocks and heat.

  • Quick connect/disconnect without tools, making transport and maintenance easier.

  • Safety mechanism on the trigger to prevent accidental arc activation.

Back to top