Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Telwin
Reference: 816146+804415
(2 reviews)
€968.63
787,50 € tax excl.
or 4 x 242,16 €
Free delivery
2-year warranty
Telwin Plasma Cutter (Inverter Plasma Cutter): Technology, Superior, Infinity | EURO-WELDING
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
Save 10%
In stock
Telwin
Reference: 816148
(2 reviews)
€1,224.87
€1,360.97
995,83 € tax excl.
or 4 x 306,22 €
Free delivery
2-year warranty
This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with a warning indicator light for consumable replacement
Supplied with a 4 m torch + ground clamp and 3 m cable
In stock
Telwin
Reference: 816146
(2 reviews)
€886.62
720,83 € tax excl.
or 4 x 221,66 €
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass....
It is compact and has a small footprint (420 x 182 x H 292 mm) and weight (7 kg)
This cutter allows a clean cut on materials up to 15 mm thick or 18 mm in separation.
It allows piercing of sheet metal (refer to the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable replacement indicator device c
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with an indicator light signalling the need to replace consumables.
Delivered with a 4 m torch + earth clamp and cable 3 m long
In stock
Telwin
Reference: 816147
(3 reviews)
€1,224.87
995,83 € tax excl.
or 4 x 306,22 €
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables clean cutting of materials up to 12 mm thick or 15 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable change indicator device
This cutter is fitted with a warning indicator light for consumable replacement
Delivered with a 4 m torch + ground clamp and cable 3 m long
Supplier stock
Telwin
Reference: 816170 +804041
€3,068.85
2 495,00 € tax excl.
or 4 x 767,21 €
Free delivery
2-year warranty
Inverter technology plasma cutter with contact pilot arc ignition.
Enables fast cutting without distortion, cutting through grating, and gouging of all conductive materials, such as steel, stainless steel, galvanized steel, aluminium, copper, or brass for example.
Easy-to-read digital display.
High cutting current stability.
Thermostatic protection against overvoltage and undervoltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20 - 30 mm depending on materials.
Adjustment range from 20 to 70 A
Options:
1) Interface with automated cutting table
2) Remote control
Requires connection to a compressor delivering 200 l/min of air at a pressure of 4 - 5 bar.
Supplied with:
1 Tecmo torch 6 m long fitted with a 70 A nozzle + 1 spare 70 A nozzle.
1 ground clamp + cable 25 mm² cross-section, 5 m long
Supplier stock
Telwin
Reference: 816070
€1,965.54
1 598,00 € tax excl.
or 4 x 491,39 €
Free delivery
2-year warranty
Inverter plasma cutter with contact pilot arc ignition.
Enables fast, distortion-free cutting, cutting on mesh and gouging of all conductive materials, such as steel, stainless steel, galvanised steel, aluminium, copper, or brass for example.
Easy-to-read digital display.
High cutting current stability.
Thermostatic protections for over-voltage and under-voltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20–30 mm depending on materials.
Adjustment range: 20 to 70 A
Options:
1) Interface with automated cutting table
2) Remote control
Requires connection to a compressor delivering 200 l/min of air at a pressure of 4–5 bar.
Supplied with: