Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Reference: 802955
Automatic plasma torch length 12 m - with consumables
€958.38
779,17 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Description
Important
The torch must be fitted with the correct consumables, chosen according to the application and the set current. A poor choice of consumable will cause cutting defects, premature wear of consumables and even malfunction of the entire unit.
Regularly check the wear condition of the protective nozzle, the tip and the electrode, or in the event of a significant reduction in cutting speed. It is recommended to replace the tip and electrode at the same time.
Consumables are wear parts; it is important to know when to replace them. Visually: melted or damaged consumables, nozzle holes>1.5mm, worn electrodes, melted pads… Practically: loss of cutting performance, difficult arc starting on workpiece, etc.
Regarding the nozzle: Tighten the nozzle so that all parts are firmly locked. The nozzle should not turn easily.
Use compressed air with oil and water filtration.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Gys
Reference: 040175
(4 reviews)
€19.63
15,96 € tax excl.
Fast delivery
2-year warranty
2 diffusers for plasma cutter torch Gys models Cutter 31 or 40 FV and model with integrated compressor Cutter 35 KF
In stock
Gys
Reference: 037625
(3 reviews)
€26.60
21,63 € tax excl.
Fast delivery
2-year warranty
1 cutting guide 20/70A for torch MT -70
In stock
Gys
Reference: 039957
(13 reviews)
€60.48
49,17 € tax excl.
Fast delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 nozzle tips
- 3 electrodes
It is compatible with the Gys Cutter 31 and 40 FV and Easycut 40 plasma cutters
In stock
Telwin
Reference: 804416
(2 reviews)
€121.98
99,17 € tax excl.
Free delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
In stock
Lincoln Electric
Reference: W03X0893-41A
€57.10
46,42 € tax excl.
Fast delivery
2-year warranty
1 shield cup for Lincoln Tomahawk 1025 plasma cutter torch
Compatible with Lincoln LC 65 and 65 M torch
Save 10%
In stock
Trafimet
Reference: CV0024
(4 reviews)
€28.70
€31.89
23,34 € tax excl.
Fast delivery
2-year warranty
Cutting guide carriage for plasma cutter torch
Compatible with TRAFIMET torches;
References:
Ergocut S 25K / S 35K / S 25
Ergocut S45
In stock
Trafimet
Reference: PD0116
(9 reviews)
€19.68
16,00 € tax excl.
Fast delivery
2-year warranty
10 nozzles for plasma cutter torch available in 3 diameters: 0.6 - 0.8 and 0.9 mm.
Suitable for torches found on the brands
Deca
The IPAC 1235 and IPAC 1235 K models accept nozzles of Ø 0.6 and 0.8 mm.
The D-PAC 60 plasma cutter accepts nozzles of Ø 0.8 and 0.9 mm
These nozzles fit on Trafimet S 25 - S25K - S35 K - S45 and S45 P plasma torches
Before purchasing, check the usable nozzle Ø in your Trafimet torch manual.
In stock
Lincoln Electric
Reference: W03X0893-14R
€48.59
39,50 € tax excl.
Fast delivery
2-year warranty
Cutting guide for plasma cutter torch LC 40/60/65/80/100/105 compatible with Lincoln plasma cutters:
Tomahawk 1025
In stock
Gys
Reference: 037601
(3 reviews)
€48.49
39,42 € tax excl.
Fast delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
In stock
Gys
Reference: 037977
(1 review)
€80.97
65,83 € tax excl.
Fast delivery
2-year warranty
Replacement trolley for the MT70/125A compass kit
In stock
Gys
Reference: 061613
(1 review)
€142.47
115,83 € tax excl.
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles
- 3 electrodes
- 1 deflector pad
This kit is compatible with the MT-70 torch model.
Save 10%
Supplier stock
Trafimet
Reference: CV0025
€73.43
€81.59
59,70 € tax excl.
Fast delivery
2-year warranty
This compass kit can be used with the DECA 1235 and 1235 K plasma cutter.
Compatible with TRAFIMET torches, references:
-Ergocut S25K / S35K / S25
-Ergocut S45 / S45P
In stock
Gys
Reference: 060753
(2 reviews)
€203.97
165,83 € tax excl.
or 3 x 67,99 €
Free delivery
2-year warranty
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
In stock
Gys
Reference: 037557
(4 reviews)
€39.98
32,50 € tax excl.
Fast delivery
2-year warranty
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
In stock
Gys
Reference: MT-70
(1 review)
€507.38
412,50 € tax excl.
or 4 x 126,85 €
Free delivery
2-year warranty
Torch for plasma cutter MT-70
This torch also allows gouging
Duty cycle: 50 A@100% - 65 A@60% - 70 A @ 50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
For gouging: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
For gouging: 5.6 bar - 185 l/min
For torch installation, the power source must be switched off.
Supplied without consumables.
Supplier stock
Lincoln Electric
Reference: W03X0893-115A
€602.70
490,00 € tax excl.
or 4 x 150,68 €
Free delivery
2-year warranty
This kit for Lincoln LC 105 manual torch
It contains:
- 1 nozzle
- 1 gouging nozzle
- 2 diffusers
- 5 nozzles 60 A
- 15 nozzles 100A
- 5 gouging nozzles
- 3 extended nozzles 100 A
- 20 electrodes
- 3 extended electrodes
- 1 standoff guide
- 1 nozzle shield
- 1 nozzle shield for gouging
- 1 extended nozzle shield
- 2 O-rings
1 silicone lubricant for O-ring
Kit adapted to the plasma torch on the cutter
Lincoln Tomahawk 1538
Saf Prestojet 100
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m