Mig-Mag 500 A torch Ergoplus 500
  • Mig-Mag 500 A torch Ergoplus 500

ERGOPLUS 500 EURO TORCH Water-cooled.

The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new double swivel joint,
- removable torch handle (included in all standard torch assemblies),
- cable assembly fitted with a new reduced surface friction, for smooth movement without snagging,
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- new rear housing to prevent crushing of water hoses,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m and 4 m

Euro connection
Water cooling - 1.6 L/minute

Duty cycle 450 A @ 100% with mixed gas
For use with welding wire Ø 1 to 2.4 mm
Accepts M8 threaded contact tips

factory-equipped with a liner for steel or stainless steel wire Ø 1.2/1.6 mm and a 1.2 mm contact tip

Reference: MB2602-030

MIG-MAG 500 A Ergoplus 500 Torch

Trafimet
(1 review)
By purchasing this product you will earn 3.03 € thanks to our loyalty program. Your cart will total 3.03 €.
favorite_border favorite

Based on 1 review

See the reviews
€186.55

151,67 € tax excl.

In stock
Shipping within 24h
Delivery in 24-48h
A question about this product? Characteristics Accessories Description

ERGOPLUS 500 EURO TORCH Water-cooled.

The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new double swivel joint,
- removable torch handle (included in all standard torch assemblies),
- cable assembly fitted with a new reduced surface friction, for smooth movement without snagging,
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- new rear housing to prevent crushing of water hoses,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m and 4 m

Euro connection
Water cooling - 1.6 L/minute

Duty cycle 450 A @ 100% with mixed gas
For use with welding wire Ø 1 to 2.4 mm
Accepts M8 threaded contact tips

factory-equipped with a liner for steel or stainless steel wire Ø 1.2/1.6 mm and a 1.2 mm contact tip

By purchasing this product you will earn 3.03 € thanks to our loyalty program. Your cart will total 3.03 €.
Choose your length : 3 M (Référence MB2602-030)
Last items in stock

100% secure payment in 2, 3, 4 or 10 instalments by credit card or PayPal
Secure payment methods
2 to 5 year warranty
Expert after-sales service
Authorised Euro Welding dealer
A question about this product?

Characteristics of MIG-MAG 500 A Ergoplus 500 Torch

Cooling type Water

Customer reviews

Product reviews
Guaranteed Reviews View the certificate

Reviews subject to moderation

0
1★
0
2★
0
3★
0
4★
1
5★
10/10


Based on 1 review

  • top

    Romain m. Published on Dec 18, 2022 at 11:09 am (Order date: Dec 15, 2022)
    5


Expert advice for professionals and individuals

Benefit from the support of specialists, whatever your profile.

Secure payment

Your transactions are protected by the latest security technologies.

Express delivery in 24/48 h

Fast dispatch to France, Europe and overseas territories upon confirmation of your order.

Best price guaranteed

Enjoy the most competitive prices on the market all year round.

16 other products in the same category:

favorite_border favorite
Argon and Argon +CO² column gas regulator

In stock

Le Lorrain

Reference: 054201

Argon and Argon +CO² column gas regulator
(3 reviews)

€203.97

165,83 € tax excl.

or 3 x 67,99 €

Free delivery

2-year warranty

This column regulator provides very precise gas flow control, ideal for TIG welding of stainless steel and aluminium
Regulator set at 3.5 bar with column (rotameter) from 0 to 30 L

Type C connection thread

French Manufacturing

favorite_border favorite
URANIA electrode holder

In stock

Sacit

Reference: URANIA

URANIA electrode holder
(1 review)

€33.46

27,20 € tax excl.

Fast delivery

2-year warranty

Lever electrode holder
Die-cast brass body
Insulating coating in non-flammable, heat-resistant thermosetting materials
Electrode clamping in 5 positions

URANIA 5 For cable cross-section 35 - 50 mm²
250 A @ 60% and 300 A @ 35% - For electrodes from 3.2 to 5 mm

URANIA 6 For cable cross-section 50-70 mm²
300 A @ 60% and 400 A @ 35% - For electrodes from 4 to 6.3 mm

favorite_border favorite
Welding brush with crimped steel wire for brushing steel

In stock

A.T.I

Reference: 16508

Welding brush with crimped steel wire for brushing steel

€13.32

10,83 € tax excl.

Fast delivery

2-year warranty

Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm

favorite_border favorite
Trafimet - MIG Torch 250 A Ergoplus 25 Premium Aluminium

Supplier stock

Trafimet

Reference: MA4202-030-ALU

Trafimet - MIG Torch 250 A Ergoplus 25 Premium Aluminium
(2 reviews)

€117.87

95,83 € tax excl.

Fast delivery

2-year warranty

New MIG-MAG Torch Trafimet model Ergoplus 25 Premium

The MIG ERGOPLUS torch series has been redesigned, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible spring plastic support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.

Length 3 m fitted with a liner and a contact tip for aluminium wire Ø 1 mm 

Euro connector
Air cooling.

Duty cycle: 220 A @ 60% 

favorite_border favorite
3 gas nozzles diameter 15 mm - Length 55 mm Trafimet

In stock

Trafimet

Reference: MC0023P

3 gas nozzles diameter 15 mm - Length 55 mm Trafimet
(9 reviews)

€15.57

12,66 € tax excl.

Fast delivery

2-year warranty

3 gas nozzles Ø 15 mm
Length 55mm.

This nozzle fits onto the end of your Trafimet Ergoplus 25 - 25 Flex MIG torch
Its role is to direct the gas flow towards the weld and the melting wire.

Suitable for welders equipped with a 220 A @ 60% torch

 

favorite_border favorite
Drive roller for DECA welder wire

DECA

Reference: 010673

Drive roller for DECA welder wire
(35 reviews)

€4.61

3,75 € tax excl.

Fast delivery

2-year warranty

Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).

favorite_border favorite
10 contact tips for Aluminium wire M6 thread - length 28 mm

In stock

Trafimet

Reference: MD0009

10 contact tips for Aluminium wire M6 thread - length 28 mm
(13 reviews)

€9.15

7,44 € tax excl.

Fast delivery

2-year warranty

Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire

3 diameters available: 0.8 - 1 and 1.2 mm

M6 thread. Length 28 mm

For MIG-MAG torch 250A @60%

favorite_border favorite
Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)

In stock

Oxyturbo

Reference: 215310

Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)
(17 reviews)

€26.54

21,58 € tax excl.

Fast delivery

2-year warranty

Flow meter for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O².

The maximum possible setting with this regulator is 6 liters per minute when fully open

M10 thread
Ridged fitting for hose with inner Ø 6.3 to 7.5 mm

We offer two models

  • With one gauge to adjust the flow rate precisely  
  • With two gauges to check the fill level of the cylinder and adjust the flow rate precisely 

 

Regulators accepting gas hoses with an inner diameter of 6.5 to 7.3 mm

 

 

 

favorite_border favorite
KEMPPI - Wire guide liner for steel or stainless steel

In stock

Kemppi

Reference: 4307650

KEMPPI - Wire guide liner for steel or stainless steel

€28.03

22,79 € tax excl.

Fast delivery

2-year warranty

Wire guide liner for steel or stainless steel wire Ø 0.6 to 1 mm.
Suitable for KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5

* Torch model fitted on the MINARMIG 170 AND 200 EVO welding machines sold on our website.

favorite_border favorite
2 gas nozzles diameter 10 mm for Helvi Fox 160 - Panther 132

HELVI

Reference: 23005007

2 gas nozzles diameter 10 mm for Helvi Fox 160 - Panther 132
(7 reviews)

€8.97

7,29 € tax excl.

Fast delivery

2-year warranty

This nozzle fits on the end of your MIG torch

Its role is to direct the gas flow toward the weld and the melting wire.
This nozzle has an internal thread fitting the torches of HELVI Fox 160 and Panther 132 welding machines

favorite_border favorite
Magnetic 300 A MAGSWITCH Earth Clamp

In stock

Magswitch

Reference: W000373781

Magnetic 300 A MAGSWITCH Earth Clamp
(3 reviews)

€93.89

76,33 € tax excl.

Fast delivery

2-year warranty

Switchable magnetic earth clamp 300 Amperes
Duty cycle 300 A @ 60%
Ideal for welding parts with a large flat or curved surface
Please purchase the lug reference F11533
Maximum cable cross-section: 35-50 mm²

favorite_border favorite
Adapter for wire spool Ø 100 mm TELWIN

In stock

Telwin

Reference: 990703

Adapter for wire spool Ø 100 mm TELWIN
(16 reviews)

€18.33

14,90 € tax excl.

Fast delivery

2-year warranty

This accessory allows the use of wire spools with a diameter of 100 mm (flux-cored, stainless steel or aluminum wire) on Telwin welding machine models when not supplied upon purchase.

This is particularly the case for the welding machine: Technomig 215 Dual Synergic.

favorite_border favorite
LINCOLN |Lincoln LGS3-250G MIG-MAG Torch

In stock

Lincoln Electric

Reference: W10430-25

LINCOLN |Lincoln LGS3-250G MIG-MAG Torch
(4 reviews)

€90.20

73,33 € tax excl.

Fast delivery

2-year warranty

Lincoln LGS3 250A torch - EURO connector

Available lengths: 3, 4 and 5 m

  • Ergonomic handle for comfortable welding day after day
  • Cable articulation via a unique and flexible ball joint for comfortable welding in all positions.

Duty cycle 230 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.2 mm
Supplied with a Ø 1 mm contact tip (M6 thread), a Ø 15 mm conical gas nozzle, and a 1/1.2 liner.

 

favorite_border favorite
Lincoln - 1 Drive Roll for BESTER 190 C -Multi and 215 MP welder

Lincoln Electric

Reference: S33444

Lincoln - 1 Drive Roll for BESTER 190 C -Multi and 215 MP welder
(2 reviews)

€11.48

9,33 € tax excl.

Fast delivery

2-year warranty

These drive rolls are designed for Lincoln welder models in the BESTER 190C -Multi and 215MP range

4 drive rolls available depending on the Ø and type of wire to be welded:

For solid steel or stainless steel wire Ø 0.6 / 0.8 mm ( Lincoln reference S33444-20 )
For solid steel or stainless steel wire Ø 0.8 / 1 mm ( Lincoln reference S33444-21 )

For solid aluminium wire Ø 0.8/ 1 mm ( Lincoln reference S33444-22 )
For flux-cored wire Ø 0.9 / 1.2 mm ( Lincoln reference S33444-23 )

The drive roll is reversible; with one drive roll you have two possible wire diameters.

favorite_border favorite
Swan neck for MIG Ergoplus Trafimet torch

In stock

Trafimet

Reference: MF00

Swan neck for MIG Ergoplus Trafimet torch
(5 reviews)

€13.16

10,70 € tax excl.

Fast delivery

2-year warranty

Swan neck for Trafimet MIG-MAG torch, Ergoplus 

Reference MF0032 is intended for the Ergoplus 15
Reference MF0033 is intended for the Ergoplus 25
Reference MF0034 is intended for the Ergoplus 36 and Ergoplus 36 M8

favorite_border favorite
MIG-MAG Torch 150 A Trafimet Ergoplus 15 Premium

In stock

Trafimet

Reference: ERGOPLUS-15P

MIG-MAG Torch 150 A Trafimet Ergoplus 15 Premium
(8 reviews)

€73.48

59,74 € tax excl.

Fast delivery

2-year warranty

New MIG-MAG Torch Trafimet model Ergoplus 15 Premium

The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural grip handle,
- new plastic spring flexible support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable utilization rate.
Consumables are compatible with most European brands.

Length 3 m and 4 m

Euro connection
Air-cooled.

Duty cycle: 150 A @ 60%
For use with Ø 0.6 to 0.9 mm welding wire
Accepts M6 threaded contact tips

Originally equipped with a liner for 0.6 / 0.9 mm wire, and a 0.8 mm contact tip.