Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
C-clamp for sheet metal.
3 possible clamping sizes.
Reference: 2510003
C-shaped steel sheet metal clamp
€4.77
3,88 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
C-clamp for sheet metal.
3 possible clamping sizes.
Customer reviews
Product reviews
-
Good quality, to be seen in use.
-
Great, pretty strong magnet, hold on tight.
-
Works very well, well made I recommend
-
This is the wire model of my soldering iron machine. 0.8 mm steel cored wire that I couldn't find in stores.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
RHODIUS
Reference: 210829
(6 reviews)
€3.64
2,96 € tax excl.
Fast delivery
2-year warranty
Extra thin cut-off disc for optimal precision. This disc has a thickness of 0.6 mm
Producing very little burr, it allows cutting of steel and stainless steel
Very useful for thin sheet materials such as automotive bodywork, thin-walled tubes and profiles, corrugated sheets...
Bore 22.23 diameter 125 mm
Supplier stock
StrongHandTools
Reference: TD6-1212Q-K3
€3,523.95
2 865,00 € tax excl.
or 4 x 880,99 €
Free delivery
2-year warranty
Plateau dimension 1200 x 1200 mm
The table plate nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Plate thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted load: 750 kg
Jelt
Reference: 5090
(72 reviews)
€7.12
5,79 € tax excl.
Fast delivery
2-year warranty
The active ingredient of the SOUDURE ANTI-GRATTONS is effective over time and benefits from high anti-adhesion properties that prevent the adhesion of metal spatter and weld spatters on welding torch nozzles or any surfaces near the work area. Formulated without chlorinated or petroleum solvents, the SOUDURE ANTI-GRATTONS is neither toxic nor irritating.
Thanks to its specific water-based formulation, the SOUDURE ANTI-GRATTONS is non-flammable, releases no unpleasant odour and generates neither smoke nor dangerous vapours for the user during welding operations. The SOUDURE ANTI-GRATTONS is 92% biodegradable.
The SOUDURE ANTI-GRATTONS rinses off very easily with water and contains corrosion inhibitors. Silicone-free, it is compatible with post-finishing operations and can be used on surfaces that are to be painted, bonded or varnished.
The SOUDURE ANTI-GRATTONS is particularly recommended when you want to avoid any trace of grease on metal surfaces. It also facilitates the demoulding of parts made of polyurethane, polyester, epoxy, various plastics or rubber moulded by injection, compression or casting.
SOUDURE ANTI GRATTONS Silicone-free water-based anti-adhesion spray
MAIN CHARACTERISTICS
• Water-based formula without chlorinated or petroleum solvents
• Prevents the adhesion of molten metal spatter: welding spatter.
• Non-flammable
• Easy removal of welding spatter by simple brushing
• Transparent film in the form of micro-droplets
• Long-lasting protection
• Releases no vapour or smoke
• No unpleasant odour • Mould release action
• Contains a corrosion inhibitor
• Very easy removal of the SOUDURE ANTI GRATTONS film
• Silicone-free to facilitate post-finishing operations
FIELDS OF APPLICATION
• Protection of the welding station environment
• Protection of parts before welding
• Nozzle, soldering iron tip
• Welding robots
• Steel or aluminium moulds • Mould release agent for plastic injection moulding
In stock
Weldline
Reference: RESTORINOX-G
(2 reviews)
€24.60
20,00 € tax excl.
Fast delivery
2-year warranty
Final treatment phase to restore the stainless property of steel
Available in 2 and 10 kg pots in gel form
This is the final phase of the entire process, necessary to restore the stainless property of steel.
This removes contamination from the surface of stainless steel after various work phases and thus regenerates the oxide layer that gives stainless steel its properties.
In fact, this work phase recreates the chrome layer damaged by heat, while reducing the spontaneous oxidation time.
Through this process, the oxide layer that protects against external agents is restored.
How to use RESTORINOX?
First, degrease and pickle the area to be treated with the specific products CLEANOX and PICKLINOX. Then apply the product.
Rest times will vary from 20 to 60 minutes.
At the end of the treatment, rinse the product with water. Do not expose the product or the treated surface to sunlight or any atmospheric agent.
In stock
RHODIUS
Reference: XT77
(14 reviews)
€1.59
1,29 € tax excl.
Fast delivery
2-year warranty
Cut-off disc producing minimal burr, used at high cutting speeds and generating few sparks
Enables cutting of steel
Suitable for cutting rebar, sheet metal and hardened steel
Available in 2 thicknesses: 1 and 1.5 mm - Bore 22.23
These thin discs are particularly useful for cutting solid or thin materials (less than 3 mm)
Their advantages:
Minimal thermal stress
Reduced friction on the workpiece
Reduced blue discolouration
Cut almost burr-free
In stock
SILICONI
Reference: ZINCOSIL 430
€6.92
5,63 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.
400 ml aerosol
PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.
SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance
In stock
StrongHandTools
Reference: T64216
(1 review)
€8.71
7,08 € tax excl.
Fast delivery
2-year warranty
This stop allows workpieces to be held in place
Compatible with any welding table with Ø 16 mm holes
Tube size: 65 mm maximum
In stock
Lincoln Electric
Reference: W000010167
€151.70
123,33 € tax excl.
or 3 x 50,57 €
Free delivery
2-year warranty
The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.
Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches
Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.
Supplied in a 9.6 L container
Supplier stock
StrongHandTools
Reference: TPL7653
(1 review)
€237.55
193,13 € tax excl.
or 3 x 79,18 €
Free delivery
2-year warranty
The plasma cutting table supports 45 kg over a cutting surface of 450 x 710 mm with 14 reversible / replaceable steel slats
The width between the slats is 45 mm, providing ample space for clamping in the low position
The blades stay firmly in place when the table is folded. Cut, clamp and fix on a convenient mobile workstation at the ideal and uniform working height
In stock
FISCHER-DAREX
Reference: CGJ5
(1 review)
€6.81
5,54 € tax excl.
Fast delivery
2-year warranty
Knurled body pin punch Ø 0.8 mm.
Diameter 2-3-4-5 and 6 mm
In stock
Weldline
Reference: PICKINOX-P
(4 reviews)
€24.08
19,58 € tax excl.
Fast delivery
2-year warranty
Removes oxides after stainless steel welding.
Available in 2 kg and 10 kg jars in paste form
Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.
How to use Picklinox paste?
Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.
In stock
FISCHER-DAREX
Reference: PAD.150
€28.29
23,00 € tax excl.
Fast delivery
2-year warranty
Polished steel caliper readable to 1/100th - Digital display of measurement
Delivered in a case with a 150 mm steel ruler
In stock
SOUDO METAL
Reference: MI-MPH25
(82 reviews)
€12.30
10,00 € tax excl.
Fast delivery
2-year warranty
Small magnetic positioner.
Possible angles: 45 - 90 and 135°.
Dimensions: A: 57 mm and B: 62 mm.
Capacity: 2 kg.
In stock
Telwin
Reference: 804031
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866
AEG Powertools
Reference: 4935451310
(11 reviews)
€173.22
140,83 € tax excl.
or 3 x 57,74 €
Free delivery
2-year warranty
1300 W angle grinder with speed selector, suitable for metalwork
Disc diameter: 125 mm.
Metal gearbox for greater durability
Aluminium cast iron guard adjustable at 90°
Motor delivering 11,500 RPM in operation
Anti-vibration handle in 3 positions and tool-free guard adjustment
LLO system preventing the machine from restarting after a power cut
Simple and quick disc change; Fixtec system
Power cable: 4 m
Supplied in a case with AVS handle, flange and 3 flap discs + 1 sanding pad + 10 abrasive discs
In stock
RHODIUS
Reference: KSM-RS28
(18 reviews)
€4.17
3,39 € tax excl.
Fast delivery
2-year warranty
Grinding wheel thickness 7 mm. Bore 22.23 diameter 125 mm
Two wheels are available depending on the material: stainless steel or steel
The stainless steel grinding wheel can also be used on steel if needed
C-clamp for sheet metal.
3 possible clamping sizes.