Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- Out of stock
This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.
It is suitable for DECA machines:
Decastar 135 EVO.
Startwin 135 EVO.
Reference: KITBOUT
DECA disposable gas cylinder support kit
€4.92
4,00 € tax excl.
Out of stock
This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.
It is suitable for DECA machines:
Decastar 135 EVO.
Startwin 135 EVO.
Customer reviews
Product reviews
-
Support a little weak but does the job.
-
Not yet installed
-
this one we had but the auto welding wire and bottle without co2 not
-
Ok
-
Practical for stabilizing the bottle
-
Good value for money
-
good for disposable bottles
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
SOUDO METAL
Reference: MI-MPH25
(82 reviews)
€12.30
10,00 € tax excl.
Fast delivery
2-year warranty
Small magnetic positioner.
Possible angles: 45 - 90 and 135°.
Dimensions: A: 57 mm and B: 62 mm.
Capacity: 2 kg.
In stock
Trafimet
Reference: ERGOPLUS-500
(1 review)
€186.55
151,67 € tax excl.
or 3 x 62,18 €
Free delivery
2-year warranty
ERGOPLUS 500 EURO TORCH Water-cooled.
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new double swivel joint,
- removable torch handle (included in all standard torch assemblies),
- cable assembly fitted with a new reduced surface friction, for smooth movement without snagging,
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- new rear housing to prevent crushing of water hoses,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Water cooling - 1.6 L/minute
Duty cycle 450 A @ 100% with mixed gas
For use with welding wire Ø 1 to 2.4 mm
Accepts M8 threaded contact tips
factory-equipped with a liner for steel or stainless steel wire Ø 1.2/1.6 mm and a 1.2 mm contact tip
In stock
Le Lorrain
Reference: 516025
(8 reviews)
€9.18
7,46 € tax excl.
Fast delivery
2-year warranty
Gas fitting for Ø 0.6 mm inner hose
Thread 12 x 100 straight
In stock
Telwin
Reference: 742402
(1 review)
€101.48
82,50 € tax excl.
Fast delivery
2-year warranty
Telwin TW 160 replacement MIG-MAG torch, length 2 m, for the welding machine references listed below
BIMAX 132 - 140 - BIMAX 152 - BIMAX 4.165 Turbo - BIMAX 162 Turbo
TECHNOMIG 150 DUAL SYNERGIC
MAXIMA 160
In stock
Le Lorrain
Reference: 094200
(101 reviews)
€97.38
79,17 € tax excl.
Fast delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
They comply with and are designed according to standard EN 585/ISO 2503
Both gauges are individually covered with a soft rubber casing to protect them from possible impacts. Gauge dimensions: Ø 50 mm
This regulator has an adjustable flow rate from 0 to 30 liters/minute
Type C connection thread.
French Manufacturing
Save 10%
Supplier stock
Reference: GC223GMIM3C
€281.88
€313.19
229,17 € tax excl.
or 3 x 93,96 €
Free delivery
2-year warranty
kemppi minarcmig evo 200 torch length 3M
In stock
Lincoln Electric
Reference: ED016354
(3 reviews)
€177.33
144,17 € tax excl.
or 3 x 59,11 €
Free delivery
2-year warranty
Main Characteristics
- Suitable for outdoor use on site in winds up to 50 km/h
- All-position welding (including downhill) of sheet metal up to 12 mm thickness
- Suitable for thin sheet> 1.2 mm with Ø 0.9 mm
- Excellent choice for welding galvanised steels
Applications
- Metal sheet or thin sheet scrap.
- Galvanised metal scrap
- Robotic/automatic applications
- General fabrication
- Maximum plate thickness: 5/16" for tubes up to 0.045" diameter for 0.045" (1.14 mm)
- Maximum plate thickness: 1/2" (12.7 mm) for tubes from 0.068 to 3/32" diameter.
Welding Positions
All positions
Spool weight: 4.5 kg
In stock
Telwin
Reference: 802817
€97.38
79,17 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines: Technomig 215 Dual Synergic - Electromig 220 Synergic and 230 Wave
It includes:
1 wire liner guide - 1 wire feed roller 0.8 / 1 mm - 3 contact tips Ø 0.8 mm and 1 mm.
In stock
Oxyturbo
Reference: 245400
(8 reviews)
€91.23
74,17 € tax excl.
Fast delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².
They comply with and are designed according to standard EN 585/ISO 2503
Pressure gauge size: Ø 70 mm.
This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter
In stock
Lincoln Electric
Reference: WP10419
(3 reviews)
€16.81
13,67 € tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner Ø 0.1 mm, 1.2 mm
2 lengths available for 3 or 4 m torch.
This liner fits 250 A torches used with Lincoln Speedtec 200 and 215 C welding machines
In stock
Trafimet
Reference: FB0117
(5 reviews)
€6.69
5,44 € tax excl.
Fast delivery
2-year warranty
2 Contact tip holders for ERGOPLUS 15 and ERGOPLUS 15 Premium torch
Supplier stock
DECA
Reference: DECA-GAL-MIGA
(13 reviews)
€11.99
9,75 € tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA units:
MIGA 215 - MIGA 218 - MIGA 220
for welding wire:
Steel Ø 0.6 / flux-cored wire Ø 0.6 to 1.2* mm
Steel or stainless steel Ø 0.8 / 1** mm
* Flux-cored wire Ø 1.2 mm is possible with the MIGA 220 and MIGA 225XL units
For MIGA 215 and 218 models, flux-cored wire up to Ø 0.9 mm only.
** solid wire Ø1 mm steel or stainless steel is possible from the MIGA 220 unit
In stock
Weldline
Reference: W000335164
(10 reviews)
€7.07
5,75 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
Soudure pro
Reference: 010845
(20 reviews)
€40.90
33,25 € tax excl.
Fast delivery
2-year warranty
CuSi3 solid wire
Wire spool Ø 100 mm - Weight 0.8 KG - Wire Ø: 0.8 mm
Welding wire suitable for HSS steel in MIG Brazing mode on electro-galvanized or galvanized steels or Cu-Si, Cu-Mn alloys.
Wire recommended for joining copper materials and various steel sheets.
Wire particularly used in the automotive industry (HSS steel, better wetting performance)
Wire classification: AWS A5.7: ERCuSi-A EN ISO 24373: S Cu 6560 (CuSi3Mn1) DIN 1733 SG-CuSi3
Shielding gas required during welding: Pure Argon
DECA
Reference: CDC-DECA
(9 reviews)
€14.05
11,42 € tax excl.
Fast delivery
2-year warranty
Swan neck for MIG-MAG DECA torch.
This product is a replacement accessory, it is not required when purchasing a new welder.
The swan neck reference must be selected according to your DECA welder reference:
Swan neck 010240 for DECA welders:
Decastar 130 and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Swan neck 010485 for DECA welders:
Decastar 150 E and 180 E
Decamig 180 E.
D-MIG 350 and 380 if your welder is fitted with a torch without EURO connection fixed to your welder.
Swan neck 010488 for DECA welders:
Decamig 2500
D-MIG 390 and 420S
JOB220 LAB -522-523
D-Mig 520T - 525T - 530S - 520SD -530SD - 525TD
MIGA 218- 220-225XL
Swan neck 010824 for DECA welder
MIGA 215
In stock
Gys
Reference: GYS-GAL1A-ACIER
(23 reviews)
€17.31
14,07 € tax excl.
Fast delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG machine for steel or stainless steel wire, available for diameters:
0.6 / 0.8 mm.
0.8 / 1 mm
Compatible with GYS machines:
Smartmig 142 -152 - 162 - 182 - 183 3P
Easymig 150 - 160 - 160XL
Sparmig 140 - 160
Multipearl 200-2
Multiweld
This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.
It is suitable for DECA machines:
Decastar 135 EVO.
Startwin 135 EVO.