By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
In stock
SOUDO METAL
Reference: MI-MPH5
€35.88
29,17 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner
Possible angles: 45 - 90 and 135 °
Dimensions: A 116 mm / B: 125 mm
Capacity: 9.2 kg
Lateral pull load capacity: 36 kg
Direct lifting capacity: 9.2 kg
In stock
SOUDO METAL
Reference: 170.00
€9.74
7,92 € tax excl.
Fast delivery
2-year warranty
Screw-type electrode holder 150 Amperes
Duty cycle 200 A@35% - 150 A@ 60%
Compatible with rutile, basic or cellulosic electrodes from Ø 1.6 to 4 mm
Maximum cable cross-section: 35 mm²
Electrode locking by screw
RIGHT-hand thread
Full insulation
Compliant with standard EN-60-974-11
In stock
SOUDO METAL
Reference: F11805S
€7.68
6,24 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 295 grams
Steel handle with a total length of 27 cm.
Supplier stock
SOUDO METAL
Reference: 110.00
€23.47
19,08 € tax excl.
Fast delivery
2-year warranty
Screw-lock electrode holder 250 Amperes
Duty cycle 250A @ 35% - 200A @ 60%
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 4 mm
Maximum cable cross-section: 35 mm²
Electrode locking by screw
Left-hand thread
Full insulation
Compliant with standard EN-60-974-11
In stock
SOUDO METAL
Reference: 130.00
€33.21
27,00 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder 300 Amperes
Duty cycle 300 A@35% - 250 A@ 60%
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 4 mm
Electrode locking by brass jaws
Head and handle in polyester resin reinforced with fiberglass
Maximum cable cross-section: 35 mm²
Cable fastening by hexagon socket screws
Compliant with standard EN-60-974-11
In stock
SOUDO METAL
Reference: MIEHSM
€10.20
8,29 € tax excl.
Fast delivery
2-year warranty
Magnetic holder for electrode holder
In stock
SOUDO METAL
Reference: MIMTSM
€10.20
8,29 € tax excl.
Fast delivery
2-year warranty
Magnetic holder for MIG torch
In stock
SOUDO METAL
Reference: MITTSM
€10.20
8,29 € tax excl.
Fast delivery
2-year warranty
Magnetic holder for TIG torch
In stock
SOUDO METAL
Reference: STUBBY
€38.95
31,67 € tax excl.
Fast delivery
2-year warranty
Screw-type electrode holder 400 Amperes - STUBBY®400
Duty cycle 300A @ 60% - 400 A@ 35%
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 6.3 mm
Maximum cable cross-section: 50 mm²
Electrode locking by screw
Right-hand thread
Full insulation
Compliant with standard EN-60-974-11
In stock
SOUDO METAL
Reference: MI-MPH25
€12.30
10,00 € tax excl.
Fast delivery
2-year warranty
Small magnetic positioner.
Possible angles: 45 - 90 and 135°.
Dimensions: A: 57 mm and B: 62 mm.
Capacity: 2 kg.
In stock
SOUDO METAL
Reference: MI-MPH35
€16.40
13,33 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
