Lincoln Powertec I 250 C STD without torch

The POWERTEC® Lincoln i are new compact inverter-type power sources designed for MIG-MAG & MMA welding. They are available in two power outputs (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large color screen, 25 pre-programmed synergic programs and numerous welding aids for the user. 

The model shown below is the Powertec 250A Advanced 

Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding defects...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' color screen
USB connectivity: Simplified software updates and diagnostics thanks to built-in monitoring functions.

This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and thickness to weld V Display of useful information V Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready to use thanks to the best settings already included
USB CONNECTIVITY Simplified software updates and diagnostics thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimized wire feeder position: stable arc, no vibration in the torch
4 drive rollers: smooth and consistent wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instantaneous and repeatable arc starting at will, immediate stabilization of the welding arc.
STABILITY Exceptional arc stabilization ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.

READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require a gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits. 

Supplied with
Ground clamp and cable length 3 m.
Gas hose length 2 m
Reversible roller for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m

This Inverter Synergic technology welding unit Lincoln Speedtec 320 CP allows you to weld using 2 processes: MMA-MIG-MAG.
This unit is perfectly suited for maintenance and repair work, metal construction (on-site or in the workshop) and the construction of aluminium structures.

It allows welding with rutile and basic electrodes (stainless steel - cast iron, etc.) from Ø 1.6 to 4 mm (electrode holder not included)

It operates on a 20 A - 400 V/3Ph domestic outlet
4-roller wire feed system

Its adjustment range is 20 to 200 A in MIG-MAG mode and 20 to 160 A in MMA mode
Easy polarity reversal to use flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.

It is equipped with the following devices:

PFC (Power Factor Corrector) It can be used with a 100 m extension cord without any loss of power.
The power supply can be provided by a generator.

HOT START adjustable, which reduces the risk of sticking when the electrode and workpiece are cold, and also facilitates arc striking and penetration.

ARC FORCE adjustable, which maintains constant amperage regardless of arc length.

ANTI-STICKING reduces the risk of electrode sticking to the workpiece.

Key features:

The high duty cycle of this unit guarantees use without premature triggering of the thermal protection system.

This unit is delivered at the time of sale with:
1 x 5 m power cable
1 x 2 m gas hose
1 x 5 m ground cable
1 set of Ø 0.8 and 1 mm rollers for steel welding wire
1 x 300 mm wire adapter

Multi-process machine allowing MMA - MIG - TIG welding.

Multi-process MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine controlled by microprocessor.
The WAVE OS system makes welding operations: customisable according to user requirements; traceable and analysable, thanks to data recording on USB; simplified, thanks to synergic parameter adjustment and the presence of specific programs for materials to be welded.
Features:
- 55 customisable programs,
- continuous and pulsed operation,
- user-friendly interface with colour TFT screen,
- Wave OS operating system with pulsed welding programs for specific materials (AB Pulse for aluminium and galvanised sheet metal) and low heat input for thin thicknesses (ATC).
Supplied with 250 A torch length 3 m duty cycle 200 A@60%, and earth clamp + cable 3 m

This is the latest generation of welding unit produced by Lincoln, designed to replace transformer-based units which will be banned from manufacture as of 31 December 2022 due to their excessive energy consumption.

This is a welding unit allowing:
- MIG-MAG
- Flux-cored wire with and without gas
- Coated electrodes

Synergic unit (easy to use) with 24 integrated programs

Products in the QUICKMIG range are easy to use and set up.
They enable welding of light structures and small-scale assemblies such as small agricultural equipment.
The range includes generators delivering 250A and 300A, equipped with large LED screens and a user-friendly interface.
As standard, the QUICKMIG features an efficient 4-roller wire feed system regardless of material type, a connector suitable for a MIG torch, wheels and a gas cylinder support at the rear of the trolley.

The Quikmig 300 is a three-phase powered unit (400V -3pH -50/60Hz) with a duty cycle of 230A@60% - 300A@35% - 175A@100%.

Included equipment
• Power cable (3 m) without plug
• Ground cable (3 m)
• Gas hose (2 m)
• Drive rollers for 0.8 and 1.0 solid wire
• User manual on USB key

Options:
- MIG-MAG torch not included.
Available on the site and compatible with this unit model and power: Weldline LGS2 -250
- Adapter for 200 mm spool reference R-1019-125-1/08R available for purchase on our site
- Electrode holder for stick welding

The ESAB Rogue EMP 210 PRO is a multi-process INVERTER technology welding machine designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system offers industrial-level arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics to suit the material being welded.
Weighing only 16.7 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.
True multi-process unit with Synergic MIG, Manual MIG, MIG brazing, flux-cored, Lift TIG and MMA (including 6010) processes
The 5.0" TFT screen is intuitive and clear, allowing the welder easy adjustment and a quick learning curve.
Synergic welding programs: complete range of welding parameters, 0.5 to 10.0 mm with a single control knob
Power Factor Correction (PFC): ensures a stable arc, resistant to mains voltage fluctuations, even when working with long extension cords up to 100 m
Unique robust industrial design: multiple handles for easy handling and cable management
Arc dynamics: precise adjustment of arc characteristics for a crisp / stable arc for carbon steel or a fluid / soft arc for stainless steel
Jobs: ability to save / recall up to 10 operations
Compliant with IP23S standard for indoor / outdoor use

Applications
Automotive construction
Automotive bodywork
Agricultural equipment
Civil engineering
Mechanical contractors
Repair and maintenance
Light fabrication

Package contents:
1 Multi-process welding machine 210 A with 3 m power cable and 16 A plug
1 MIG torch MXL 201, 3 m with Euro connector, with 1 contact tip for steel or stainless steel wire Ø 0.8 mm
1 Ground clamp with 3 m cable, OKC 35-50 16 mm2.
1 Electrode holder, Handy 200 A, heavy-duty 50 mm OKC, with 3 m cable.
1 Gas hose 4.5 m with quick connector.
1 Ø 200 mm spool of ESAB OK AristoRod steel wire 0.8 mm, weight 1 kg
1 Feed roller 0.6 / 0.8 mm (fitted on the machine) + 1 roller 0.8 / 1 mm for steel or stainless steel wire.
1 roller 0.8 / 0.9 mm for flux-cored wire
1 roller 1 / 1.2 mm for aluminum wire
1 nozzle for flux-cored wire (gasless) + 1 contact tip Ø 0.8 mm and 1 contact tip Ø 0.9 mm
1 user manual and safety instructions.

Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminium
MIG duty cycle: 240A at 60% / 200A at 100%
MMA duty cycle: 220A at 60% / 180A at 100%
Current range: 40 to 300A
Combines 3 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.2 mm and Alu 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 6 mm)
4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A MAG torch (2T/4T) 3m long (8mm contact tip)
Digital interface with very intuitive settings
Compatible with 10kVA generator
Gas cylinder holder for cylinders up to 4m3
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79x 47 cm - 44kg
IP21 rating

Delivered with:
1 x 360 A 4m MB36 torch
1 x 400 Amp 4m ground clamp
1x User manual
2x 1.0/1.2 mm rollers

Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Gas cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 41 x 72 x 77 cm - 27kg
IP21 rating

Supplied with:
1 x 250 A torch 3m MB25
1 x 200 A earth clamp 2.5 m
1 x MMA electrode holder 2 m
2x 0.8 / 1.0 drive rolls

TIG torch optional

The generators of the POWERTEC® i COMPACT RANGE are designed on the latest Lincoln Electric inverter platform, for optimal MIG-MAG and MMA welding performance with excellent energy efficiency. The range includes: generators delivering 250A, 320A, 380A and 450A, equipped with either a STANDARD screen (i250 & i320 models) or an ADVANCED screen (i250, i320, i380 & i450 models), to best meet customer needs depending on their welding applications. The COOLARC® 26 cooling unit is available in Plug & Play version for the POWERTEC® i380C & i450C ADVANCED.

The model shown below is the Powertec I380 ADVANCED, featuring a high duty cycle: 320A@60% - 240A@100%

Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding defects...)
Multilingual navigation menu
Comprehensive support menu: technical data, accessories, instructions, safety
7'' colour screen
USB connectivity: Software updates and diagnostics made easier thanks to built-in monitoring functions.

This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves.
Intuitive adjustment by selecting the process and the thickness to weld
Display of useful information
Multilingual navigation menu
MORE FUNCTIONS
AUTO START The machine is immediately ready for use with the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC START Instant and repeatable arc ignition on demand, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instantaneous adjustment of welding parameters during variations in welding conditions.

READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require a gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering energy efficiency equal to or greater than 85% and a standby consumption below the new tolerated limits. 

Earth clamp and cable, length 3 m.

Gas hose length 2 m
Reversible roll for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m

This BesterMIG 200-S Multi multi-process machine allows MMA - MIG-MAG - TIG welding
Its digital display makes it easy to read the setting information
It accepts wire spools of diameter 100 and 200 mm.
Its low weight makes it an easy ally when transporting on site. It can also be powered by a generator.

No longer worry about choosing the welding current, wire speed or material thickness. The Synergic system does it for you while guaranteeing perfect welds.
The Synergic system limits the risk of weld defects and ensures excellent quality at reduced costs.
Weld with complete peace of mind: automatic parameter adjustment saves welding time and increases your productivity
Easy polarity change for welding with flux-cored wire (gasless).

It features the following functions:
Arc-Force
Hot-Start
Anti-Stick

It is supplied with:
1 MIG-MAG torch length 3 m equipped with a contact tip for steel or stainless steel wire Ø 0.8 mm.
1 Earth clamp + Cable cross-section 16 mm² length 3 m
1 Electrode holder + cable length 3 m
1 Power supply cable length 3 m
1 Reversible drive roll for steel or stainless steel wire Ø 0.8 / 1 mm fitted on the machine
1 Reversible drive roll for steel or stainless steel wire Ø 0.6 / 8 mm
1 Shielding gas hose for refillable cylinder length 2 m 

The ESAB Rogue EMP 180 is a multi-process welding machine with INVERTER technology, designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system delivers industrial-grade arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics according to the material being welded.
Weighing only 16.2 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.

Its features

Large 14-segment display – instant readout of voltage and wire feed speed for clear visibility
- Synergic welding programs: easy adjustment of welding parameters for welds on material thicknesses from 0.5 to 8.0 mm
- Power Factor Correction (PFC) – ensures a stable arc, resistant to power fluctuations even when working with extension cables up to 100 m
- Unique robust industrial design with multiple lifting points and optimised cable management
- Arc Dynamics: Allows precise adjustment of arc characteristics to achieve a hard arc for carbon steel or a soft arc for stainless steel.
- Provision for torch with integrated spool; Rogue automatically configures when the torch is connected.
- IP23S protection rating for ideal use on job sites.

The Esab Rogue EM 180 comes with:

- 1 power cable 3 metres with Schuko 16 A plug,

- 1 MIG torch MXL 201 Euro 3 m,

- 1 earth cable kit 16 mm², 3 m,

- 1 gas hose with quick connector 4.5 m,

- 1 ESAB OK AristoRod mild steel/iron welding wire spool 12.50 0.8 mm 1 kg,

- 1 drive rollers 0.6/0.8 mm V (fitted), 0.8/1.0 mm V and 0.8/0.9 mm VK x flux-cored wire,

- safety instructions.

Intelligent 4-in-1 three-phase welding machine
MIG duty cycle: 230A at 60% / 220A at 100%
MMA duty cycle: 230A at 60% / 200A at 100%
TIG duty cycle: 240A at 60% / 220A at 100%
Current range: 15 to 250A - Voltage: 69V
Combines 4 welding processes in 1 machine:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1.2 mm and aluminum 0.8 to 1.2 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.6 mm)
- TIG Lift DC current - TIG Lift ignition
- MMA (basic and rutile electrode up to 5 mm)
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable EURO 250A 3m STEEL MIG torch (1.2 mm contact tip)
Digital interface with highly intuitive adjustment
Compatible with 9 kVA generator and 100 m extension cord
Gas cylinder support included
Three-phase 400 V - 16 A power supply
Dimensions: 75 x 45 x 80 cm - 45 kg
IP23S classification for outdoor use

Supplied with:
1 x 250 A 3m MB25 torch
1 x 3m ground clamp
1x User manual
2x 1/1.2 drive rolls

TIG torch optional

This is the very latest generation of welding unit manufactured by Lincoln, designed to replace transformer-based units which will be banned from production from 31 December 2022 as they are too energy-intensive.

This is a unit allowing welding by:
- Mig-MAG
- Flux-cored wire with and without gas
- Coated electrodes

Synergic unit (easy to use) with 24 built-in programs

Products in this QUICKMIG range are easy to use and set up.
They enable welding of light structures and small dimensions such as small agricultural equipment.
The range includes generators delivering 250A and 300A, equipped with large LED screens and a user-friendly interface.
As standard, the QUICKMIG offers an efficient 4-roll wire feed system regardless of material type, a connector suitable for a MIG torch, wheels and a gas cylinder support at the rear of the trolley.

The Quikmig 250 is a unit powered by three-phase current (400V - 3pH - 50/60Hz) and has a duty cycle of 230A@60% - 250A@35% - 175A@100%.

Included equipment
• Power cable (3 m) without plug
• Earth cable (3 m)
• Gas hose (2 m)
• Drive rolls for solid wire 0.8 and 1.0
• User manual on USB key

Optional:
- MIG-MAG torch not included.
Available on the website and suitable for this unit model and power: Weldline LGS2 -250
- Adapter for 200 mm spool reference R-1019-125-1/08R available for purchase on our website
- Electrode holder for stick (coated rod) welding

The POWERTEC® Lincoln i are new compact inverter-type power sources designed for MIG-MAG & MMA welding. They are available in two power ratings (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user. 

Two models are presented:

Powertec i320 standard (STD) Manual adjustment of welding parameters
Manual adjustment of voltage and wire feed speed
Quick button for welding process and shielding gas selection
Quick access to the most commonly used welding parameters (inductance, 2/4 stroke, Run-in, Burn-back)

Powertec i320 synergic (ADV)
Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding faults...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' colour screen
USB connectivity: Simplified software updates and diagnostics thanks to built-in monitoring functions. 

This machine features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and thickness to be welded V Display of useful information V Multilingual navigation menu
MORE FEATURES
AUTO START-UP The machine is immediately ready for use thanks to the best settings already included
USB CONNECTIVITY Simplified software updates and diagnostics thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
IGNITION Instant and repeatable arc ignition at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.

READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits. 

Supplied with: 

Earth clamp and cable 3 m long.
LINCGUN PROMIG 300 torch 4 m long
Gas hose 2 m long
Reversible drive roll for steel/stainless wire Ø 1 and 1.2 mm
Power cable 5 m long

Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminium
MIG duty cycle: 200A at 60% / 180A at 100%
MMA duty cycle: 200A at 60% / 180A at 100%
Current range: 40 to 250A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.9 to 1.2 mm and aluminium 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable MAG torch 250A (2T/4T) 3m (8mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 10kVA generator
Gas cylinder holder for cylinders up to 4m3
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79x 47 cm - 48kg
IP21 rating

Delivered with:
1 x 250 A MB25 torch 3m
1 x 200 Amp earth clamp 4m
1x User manual
2x 0.8/1 mm drive rolls

Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
2 drive rolls for spool Ø 100 mm (1 kg) or Ø 200 mm (5kg)
Removable MAG torch 250A (2T/4T) 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator
Single-phase 230 V - 16 A power supply
Dimensions: 25 x 45 x 35 cm - 16kg
IP21 rating

Supplied with:
1 x 250 A steel torch 3m MB25
1 x 200 A earth clamp 2.5m
1 x MMA electrode holder 2m
1x 0.8/1 mm drive rolls

TIG torch optional